The PTX-100 is excellent and cost-effective 2-Wire Temperature TRANSMITTER. The design is available in HEAD mounting and DINRAIL housing. The device generates 4-20mA current signal proportional to temperature. The TRANSMITTER operates on loop power supply. The current signal reduces wiring cost drastically. The effect of electrical noise is minimized & long runs of thermocouple wires is eliminated. The housing is shockproof & hermetically sealed.
- Isolated transmitters
- 1000/1500 VRMS isolation
- 12-36 VDC power supply
- True 2-wire transmitter
- Ground loop elimination
- DIN RAIL Mounting : 75H x 46W x 110D, mm
Pt-100 (2,3wire) R.T.D.
|RANGE||-200 to +800 Zero/ span User adjusttable with trimmer potentiometer|
|Accuracy||Better than ±1 %|
|Ambient Conditions||-20 °C to +80 °C|
|R.T.D. break Protection||provided, current goes to 34mA if A is open, current goes to 3.6 mAif B or B1 is open|
|Maximum Load||Maximum loop resistance RL = [ (V+) - 9V ] ÷20mA V+= Loop Power Supply|
|Reverse Polarity||Protection Provided|
|Surge Protection||Provided with zener clamp|
|Housing||1) Head Mounting : DIA (d) - 50 mm, HEIGHT(h) - 27mm 2) DIN RAIL Mounting : 75H x 22W x 92D in mm|
Pink printed dress, woven, round neck with a keyhole and buttoned closure at the back, sleeveless, concealed zip up at left side seam, belt loops along waist with slight gathers beneath, brand appliqu?? above left front hem, has an attached lining.Comes with a white, slim synthetic belt that has a tang clasp.