Leveraging on our industrial experience, we have also been able to manufacture a wide range of Dual AC Controllers that are capable of controlling two Air Conditioners at a time. These are provided with separate Phase supply for both the ACs and control by pass features too.
- Supply Voltage: 230V AC, 50 Hz +/- 15% separate for each A/C.
- Contact rating: 30 A at 230 V AC for compressor Live Outputs & 5 A at 250 V AC Alarm Potential free outputs(C, N/O)
- Temperature Sensor: Thermistor sensor NTC 10K @ 25 C metal body with clamp. Sensor cable length 2.75 meters.
- Temperature Sensing Range: 0 - 55C
- Resolution: 1 V for voltage, 0.1 A for Current & 0.1 degree C for Temperature.
- Auto/Controller Bypass Switch is used to bypass the controller i.e. A/C 1 & A/C 2 will remains ON(irrespective of temperature demands) if both switches are in ON condition.
- Indications :
a) Supply ON for A/C 1 & A/C 2: Colour: Yellow
b) Auto Mode for A/C 1 & A/C 2: Colour: Green
c) Manual Mode for A/C 1 & A/C 2: Colour: Red
d) A/C 1 & A/C 2 ON: Colour: Green
e) A/C 1 & A/C 2 Fault: Colour: Red
f) Room High: Colour: Red
g) Healthy: Colour: Green
- Mounting :Wall Mounting