WATER TREATMENT PRODUCTS / RO CONTROLLERS
SUBMERSIBLE PUMP STARTER PANEL MODEL: PSP 1P

The Starter Panel has is solid state Current Meters. It measures currents and provides protection against overload for both the motors. This is based on a Micro controller, programmed for the application. The Meter’s supplied preprogrammed for operation and can be directly installed

SPECIFICATIONS:

  • Nominal Input Voltage: 160 – 270 VAC, 50Hz.
  • Accuracy: Current:0.25% ± 1 dgts.
  • Resolution: Current:0.01 A Environmental:- 1] Working Temp : 0 to 55º C
  • Storage Temp :
    1. Working Temp : 0 to 55º C
    2. Storage Temp : 10 to 70º C
    3. Relative humidity : 0 – 95 % Non-Condensing
    4. Warm up time : 10 Sec
  • Enclosure:
    1. Mounting : Panel mounting.
    2. Dimensions : 165 (W) X 60 (L) X 115 (H).
    Cutout : 182(H) X 92(W) .
    Enclosure: 105 (W) X 200 (L) X 193 (H) mm.
  • Terminal:
    Working In normal running mode, display shows
    1. U—Voltage
    2. C—Current
    3. < Faults if any>
    • UV—Under Voltage
    • OV—Over Voltage
    • OL—Over Load
    • R-on AUTO—Relay on Auto

Specifications