STAINLESS STEEL PADDLE WHEEL FLOW SENSOR - ATN-400(SS)

Paddlewheel Flow Sensors is highly repeatable, reliable performance, rugged sensors & little or no maintenance. The Model ATN400 has open collector signal output (sink) and has a wide dynamic flow range of 0.5 to 5 m/s ( 0.3 to 20 ft/s ). The sensor use to measures liquid flow rates in full pipe. Sensors can be installed in 15 NB to 300 NB (0.5 to 12 in.) Line size. To install this sensor in process line, we offer different types of T-fitting. These T-fittings, which include “T” with threaded & flange end, weld adapter and block design to seat the sensor to the proper insertion depth into the process flow.

Flow Rate Range

:

0.5 to 5 m/s (1.6 to 16.4 ft./s)

Pipe Size Range

:

15 NB to 300 NB (0.5 to 12 in.)

Linearity

:

±1% of full range

Repeatability

:

±0.5% of full range

Min. Reynolds Number

:

4500

Required Wetted Parts

 

 

Sensor Body

:

SS 304 / SS 316

O-rings

:

Viton / Teflon

Rotor Pin

:

Hastelloy C / Tungsten Carbide

Rotor

:

Black PVDF.

Frequency

:

38 Hz per m/s nominal

 

 

(11.6Hz per ft/s nominal)

Supply voltage

:

10 to 24 VDC regulated

Supply current

:

<20 mA @ 10 to 24 VDC

Output Type

:

Pulse output ( NPN )

Cable Length

:

5 m (16.4 ft.) Standard

Operating Pressure

:

SS: max15 bar @ 25°C

Operating Temperature

:

SS: -10°C to 120°C

Specifications

Pink printed dress, woven, round neck with a keyhole and buttoned closure at the back, sleeveless, concealed zip up at left side seam, belt loops along waist with slight gathers beneath, brand appliqu?? above left front hem, has an attached lining.

Comes with a white, slim synthetic belt that has a tang clasp.