HC 2000 is a brainchild of Nippon Technologies. State-of -the-art micro controller design is a high performance solution for various HUMIDITY applications. It accepts two 4-20 mA inputs. One for Humidity and another for Temperature. Generally the signal comes from humidity transmitters.
- Typical applications
- Humidity Chambers
- Pharmaceutical & Clean room applications.
- Storage rooms, Cold storages and Ware Houses.
Building Automation & Green houses
From Humidity/Temperature Transmitter. (Dry / Wet bulb input available on request)
|Display||2 sets of (4+4) digit diaplay.
Upper for Temperature and lower for Humidity
|Range||Humidity 0 to 96.0 % RH
Temperature -20 to 80.0 ºC, depending on type of Transmitter.
|Resolution||Relative Humidity 0.1 RH
Temperature 0.1 ºC
A) Humidity Control: One relay for Humidification, second for relay for Dehumidification.
B) Temperature Control: One relay for cooling (Comprosessor / Blower), Second relay for Heating (Heater)
|Control Accuracy||± 3 % for Humidity /
± 0.25 % for Temperature
Pink printed dress, woven, round neck with a keyhole and buttoned closure at the back, sleeveless, concealed zip up at left side seam, belt loops along waist with slight gathers beneath, brand appliqu?? above left front hem, has an attached lining.Comes with a white, slim synthetic belt that has a tang clasp.